Dacor Double Oven F1 Error






Our dacor oven is displaying an f1 error i know these are hard to isolate but i've done a number of tests which i - answered by a verified appliance technician. Dacor double oven f1 error. Dacor appliance fault codes by steve ash dacor oven/range/stove fault codes: note: depending upon the brand of appliance, there can be many different names for the 'clock' component electronic range control, erc, electronic oven control, eoc, control board, and clock all refer to the same part.


dacor double oven f1 error













Dacor range / stove / oven fault codes: failure code: fault code description: solution: f0: function key stuck: replace touch pad or if touch pad is part of the clock, replace the clock (erc) f1: system watchdog circuit: press "cancel", if beeping continues after 30 seconds, replace the main control board (also called clock or erc) f2. This repair service is for a jenn-air and dacor oven control board, part number 62692. the most common problems associated with this control board are the oven not reaching temperature; the oven will not power off, and f1 or.... If alarm goes away verify the oven will complete a clean cycle without any type of failure. f3: shorted oven temperature sensor (rtd) check sensor harness and harness connection between oven sensor and oven control. replace oven temperature sensor (rtd) if wiring is ok. f4: open oven temperature sensor (rtd).



visit link reference



Comments

Popular posts from this blog

How To Fix The Printer Is Not Connected

Aeg Built In Oven Error Codes

Lainox Oven Error Codes